AMPELITE – Residential Roofing – SOLASAFE
SOLASAFE Polycarbonate Sheeting
- Manufactured in Europe
- Lifetime warranty
- UV protection blocks 99.9% of UV radiation
- Strong, lightweight, and easy to install
- High light transmission
- 1S fire performance
- Available in 3 profiles and numerous lengths from 1800mm to 6000mm
- Cut to length available
- Available in 7 colours with 760mm cover including the heat control range
Solasafe has been supplied to the New Zealand market for nearly 30 years. Manufactured in Europe, with outstanding UV performance, makes this the ideal choice to enhance your outdoor living space, for your family and friends to enjoy for years!
Solasafe Profiled Polycarbonate sheeting provides 99.9% protection from the harmful UV rays that cause sunburn and skin damage. Used as skylights or roofing, this polycarbonate profiled sheeting can help you create an outdoor living area in your home to help your family safely enjoy the New Zealand lifestyle, and also add value to your property.
Solasafe sheeting is manufactured in Europe from polycarbonate, an advanced polymer with optical and physical properties that cannot be matched by other materials. With impact strength of up to 150 times that of tempered glass, Solasafe polycarbonate sheeting will not be damaged by normal hail. It is easy to handle and install and the profiled sheets can be curved, so you can create a stylish look. Solasafe polycarbonate sheets are available in clear, tint, opal and heat control sheets. It is stable at temperatures of -40° to +110° and does not distort or soften in heat; however, it is advisable to store Solasafe sheets under cover, before installation.
Peace of Mind Warranty
Solasafe profiled polycarbonate sheeting is warranted by Ampelite to give long service under normal usage. Protection against excessive yellowing of the sheet (as detailed in the Warranty) is for a lifetime from the date of purchase. Damage from heavy hail (up to 25mm in diameter in high winds) is covered for ten years.
Solasafe has achieved an Internal Surface Finish Group number of 1-S according to performance determined under the conditions described in ISO 9705:1993 required by NZBC clause C3.4(A).
Performance is achieved through MBIE Guidance on European Classification. Please download a copy of our Solasafe Brochure for the warranty details
Handy Tips
You could try some practise holes using an off-cut or the part of a sheet that would be covered by ridging or flashings, etc. You may find it easier to drill the hole for the screw first and then enlarge this to 10mm for the washer.
Cleaning
Use only a soft brush and soapy water – no abrasives. To prevent possible staining, we recommend cleaning whenever bird soil is apparent.
SOLASAFE – Sheeting Information
PLANNING
Solasafe sheeting is available in a range of colours and profiles to suit your home and surroundings. Clear sheets transmit some 90% of glorious daylight; see the light and heat transmission tables for the percentage applicable to other colours. In cooler climates, clear sheeting allows good heat transmission, while in hot climates, tinted sheets provide a reduction in transmitted heat as well as reduced glare. Often tinted sheets are used to blend in with existing colour schemes or other roofing. If new sheeting is to be used with existing polycarbonates, please check your colour before installation as some minor variations may occur.
Before you order materials and commence building, please check the spanning table below, which will give you the maximum distance between battens and purlins. The sheet’s length and sheet coverage table will help you calculate how many sheets you require.
SHEET COLOURS / LENGTHS
| PROFILE / COLOURS | PROFILE / COLOURS | LENGTHS (M) | COVER |
|---|---|---|---|
| Greca:- Clear, Bronze, Grey, Pearl Ice, Silver Mist | Corrugated:- Clear, Bronze, Grey, Dark Grey and Opal | 1.8, 2.1, 2.4, 2.7, 3.0, 3.6, 4.2, 4.8. 5.4 & 6.0 | 760mm |
| 5 Rib:- Clear, Bronze, Grey, Opal | Corrugated:- Clear, Bronze, Grey, Dark Grey and Opal | 1.8, 2.1, 2.4, 2.7, 3.0, 3.6, 4.2, 4.8. 5.4 & 6.0 | 760mm |
SPANNING CAPACITY (BETWEEN PURLINS)
| PROFILE | MAX SPAN |
|---|---|
| CORRUGATED & GRECA | 900mm |
| 5 Rib | 1000mm |
The span between battens and supporters should not exceed the above measurements and have a minimum fall of 5 degrees for Corrugated and Greca and 3 degrees for 5 Rib.
SHEET COVERAGE TABLE – CORRUGATED GRECA & 5 RIB
| 1 SHEET | 2 SHEETS | 3 SHEETS | 4 SHEETS | 5 SHEETS | |
|---|---|---|---|---|---|
| Corrugated | 760mm | 1520mm | 2280mm | 3040mm | 3800mm |
| Greca | 760mm | 1520mm | 2280mm | 3040mm | 3800mm |
| 5 Rib | 760mm | 1520mm | 2280mm | 3040mm | 3800mm |
LIGHT & HEAT TRANSMISSION CORRUGATED GRECA & 5 RIB
| COLOUR | LIGHT TRANSMISSION | HEAT TRANSMISSION |
|---|---|---|
| Clear | 91% | 82.50% |
| Bronze | 36% | 60.60% |
| Grey | 26% | 50% |
| Opal | 55% | 35.20% |
| Dark Grey | 17% | 38.90% |
| Pearl Ice | 48% | 32.50% |
| Silvermist | 17% | 22% |
AMPELITE – SOLASAFE
INSTALLATION GUIDE
Solasafe is fixed and flashed on similar principles as steel roofing. For Solasafe profiles Corrugate and Greca, the minimum fall is 5 degrees. For Solasafe 5 rib profile, the minimum fall is 3 degrees. Start by fixing the first sheet at the end farthermost from the usual wind direction. If end laps are necessary, start at the bottom corner.
Solasafe is UV-protected on one side only. Please read the label on the sheet before installation and check each sheet label thoroughly to ensure that the UV-protected surface faces the correct way. Sheets incorrectly installed will not withstand weathering and discolouration will result.
When used vertically, face the protected side of the sheet in the direction of the most intensive sunlight or exposure to weather.
If sealing is required at side or end laps, use Ampelite lap-seal tape, or sealone polycarbonate sealant. Incompatible sealants will weaken the sheeting and void the warranty.
Allowance needs to be made when drilling screw holes so that the sheet can move freely as it expands and contracts. Screw holes must have a minimum diameter of 10mm for sheet lengths up to 4.2m. Lengths over 4.2 require 12mm diameter holes.
Clearfix Drills and Oversizes All-in-One: An alternative method of fixing, which will also speed up installation, is to use a Clearfix combination drill/cutter and weather-proof seal assemblies. These fasteners self-drill and create a correct clearance hole in the sheet in one operation.
If cutting of the sheet is required, use a fine-tooth handsaw or a power saw fitted with a masonry type cut-off blade. Support the sheet close to where you are cutting. Ampelite sheeting can be custom-cut to length on order; your supplier can arrange this if required. It is good practice to wear protective goggles when cutting any material with a power tool.
To reduce noise caused by friction, due to expansion and contraction, we recommend using Ampelite Anti-noise tape, a 25mm x 3mm white self-adhesive tape, along the top of battens. Store Solasafe on a flat surface, in a dry area, avoiding contact with chemicals, paints, and solvents.
